English
2
1
Replacement
Ordering accessories
Replacing the filter
Replacing the side brushes
Put the dust container back into the dust container compartment and put
the top cover back on the robot.
Caution: Always make sure the filter is present inside the dust
container. If you use the robot without the filter inside the dust
container, the motor will be damaged.
To buy accessories or spare parts, visit www.shop.philips.com/service or go
to your Philips dealer. You can also contact the Philips Consumer Care
Center in your country see the international warranty leaflet for contact
details .
Replace the filter if it is very dirty or damaged. You can order a new filter kit
under type number FC
in chapter 'Cleaning and maintenance' for instructions on how to remove
the filter from the dust container and how to place it in the dust container.
Replace the side brushes after some time to ensure proper cleaning results.
Always replace the side brushes when you notice signs of wear or damage.
We also recommend that you replace both side brushes at the same time.
You can order spare side brushes as part of replacement kit FC
also contains two filters and three dry wipes.
Make sure that the power switch is in 'off' position.
To replace the side brushes, grab the old side brushes by the bristles and
pull them off their shafts.
. See 'Emptying and cleaning the dust container'
. This kit