Fan Operation - Cedar Ridge MD3TPF Manual Del Usaurio

1. Follow steps 1 through 5 under Lighting
Instructions, page 18.
2. With control knob in PILOT position, strike
match, and hold near pilot. Press in control
knob; pilot should light.
3. Keep control knob pressed in for 30 sec-
onds after lighting pilot. After 30 seconds,
release control knob.
Using rocker switch, turn blower on and check for operation. Turn on rocker switch to the
desired position. In the MAN position it will remain constantly on. AUTO position will be con-
trolled by the temperature sensor. To stop the operation turn rocker switch to the O position.
20
OPERATION
MANUAL LIGHTING PROCEDURE

FAN OPERATION

www.usaprocom.com
Ignitor
Natural
Electrode
Gas
Burner
Pilot Air
Inlet Hole
Figure 21 - Pilot Assembly
Thermocouple
Propane/LP
Gas Burner
Pilot Air Inlet Hole
200033-01B