Dolphin PRO OEM 24.40 Manual Tecnico página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SAFETY PRECAUTIONS
NOT_PRO_OEM-00
4For a safe connection, the EARTH terminal
of the Winsta mains power connector must be
connected to the mains earth (green/yellow wire
of the mains power cable).
4To prevent parasite heating, ensure that
the cable cross-sections are correct and the
connectors are properly tightened.
IMPORTANT : This device is not protected against
battery polarity reversals. A battery connection
error automatically causes the battery fuses to
blow as well as irreversible damage to the circuit
board.
Activation precautions.
To prevent any risk of electric shock on activation
or during operation, the protective cover must
be correctly positioned and screwed into the
housing.
This device complies with the applicable
regulations governing transmitted interference
and immunity from external disturbances (see
EMC paragraph in the Technical specifications
section).
When in operation, take particular care that this
device is not subjected to conducted or radiated
interference at levels higher than the legal limits
otherwise malfunctions may occur (e.g.: device
too close to a powerful transmitter).
SAFETY PRECAUTIONS
NOT_PRO_OEM-00
Device serial number
The serial number appears on the grey or white
sticker on one side of the device. This number is
aligned vertically and comprises a first number
indicating the year of manufacture (e.g.: 12 for
2012), a letter indicating the month of manufac-
ture (e.g.: C for the month of March), as well as
a 5-figure number that is the product's individual
serial number.
Important
Note on the choice of charge curve
It is important to note that the use of an
inappropriate charging cycle for the battery
technology may extensively impair or even
damage the latter.
This is particularly true for cycles where the
charge voltages are higher than the levels
recommended by the battery manufacturers.
Example: A serious risk of overheating the
batteries and releasing gases that are harmful to
users' health.
Curve no. 9 is compatible with a LiFeSo4
battery provided that the battery is equipped
with BMS-type battery protection (Battery
Management System) within the actual battery.
In this case, refer to the battery manufacturer's
recommendations for the choice of charging
cycle.
UK

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pro oem 24.100

Tabla de contenido