Sanus VLC1 Manual De Instrucciones página 10

3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 3/4 in. (70 mm). Be sure to drill into the center of the stud.
4. Install the wall plate
09
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
movement of the wall plate
Go to STEP 3 on PAGE 16.
3
10
using four lag bolts . Tighten all lag bolts only until they are pulled firmly against the wall plate.
11
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
09
2 3/4 in. (70 mm)
7/32 in.
(5.5 mm)
MUST BE firmly tightened to prevent unwanted
11
4
11
09