6.
Hold the end of the anchor
7.
Snap off the ends of the anchor
CAUTION:
Be sure the cap
8.
Install the four screws
S2
CAUTION:
Avoid potential personal injury or property damage! All four screws
movement of the wall plate
*
Steel Stud Anchor Kit is NOT INCLUDED Contact Customer Service at 1-800-359-5520 to have the additional hardware shipped directly to you.
6
P
S1
*
, while sliding the cap
S1
*
to lock in place.
S1
is seated against the drywall surface and the ends of the anchor do not extend beyond the cap
P
*
*
and washers
S3
and firmly tighten until the washers are pulled flush against the wall plate
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
09
7
S1
against the drywall.
P
S2
8
P
*
MUST BE firmly tightened to prevent unwanted
S2
S3
- cut if neccessary.
P
.
09
S1
09
15