Publicidad
Idiomas disponibles
Idiomas disponibles
DATE
8. Press and release the IN button to advance the
month (12 hour setting).
9. Press and release the OUT button to advance
the day (12 hour setting).
10.Press and release the SET button to confirm and
advance to the snooze setting.
X. SETTING THE SNOOZE
Note: This is an unused function of the indoor
temperature station and should be disregarded. The
setting has no bearing on the operation. Please
press and release the SET button to advance to
select the temperature format.
XI. SELECTING ˚F OR ˚C
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the time LCD and the number
setting will flash.
3. Press and release the SET button nine times.
4. Either "˚F" or "˚C" will flash in the time LCD.
TIME
DST
5. Press and release the IN button to select the
temperature format.
6. Press and release the SET button to confirm and
complete the setup.
XII. SETTING THE FORECAST SENSITIVITY
Note: This is an unused function of the indoor
temperature station and should be disregarded. The
setting has no bearing on the operation. Please
press and release the SET button to exit the manual
setting.
GB
P.14
III. MINIMUM AND MAXIMUM TEMPERATURE
RECORDS
The WS-7215U keeps a record of the MINIMUM and
MAXIMUM temperature, and the time and date of
their occurrence-for both the indoor and outdoor
modes.
A. VIEWING THE INDOOR TEMPERATURE
RECORDS
1. Press the IN button once. "MIN" appears above
the indoor temperature and the LCD will flash,
indicating that the minimum temperature (along
with the humidity measured at that time) and the
time and date of occurrence are displayed. The
minimum records will display for 30 seconds
before returning to the normal display mode.
INDOOR
INDOOR
MIN
HUMIDITY
%
RH
2. Press the IN button again (once while "MIN" is
still displayed, twice otherwise). "MAX" appears
above the indoor temperature and the LCD will
flash, indicating that the maximum temperature
(along with the humidity measured at that time)
and the time and date of occurrence are
displayed.
3. While "MAX" is still displayed press the IN button
again to return to the current data display. Or
you can wait 30 seconds, during either the
minimum or the maximum readings, and the unit
will automatically return to current data readings.
B. VIEWING THE OUTDOOR TEMPERATURE
RECORDS
1. Press the OUT button once. "MIN" appears
above the outdoor temperature and the LCD will
flash, indicating that the minimum temperature,
GB
P.16
FEATURES OF THE WS-7215U
WWVB Tower
Icon (indicates
time reception)
I. INDOOR TEMPERATURE AND HUMIDITY
The current indoor temperature (viewed on the left)
and relative humidity (viewed on the right) are
displayed in the INDOOR LCD.
II. OUTDOOR TEMPERATURE
The temperature received from the remote
temperature sensor is viewed in the OUTDOOR
LCD. When there is more than one remote
temperature sensor unit in operation, a "boxed"
number will appear to the right of the temperature.
This indicates which remote temperature sensor unit
(1, 2, or 3) is currently displaying its data in the
OUTDOOR LCD. (This feature is explained in
fur ther detail in section IV-Adding Remote
Temperature Sensors).
and the time and date of occurrence are
displayed. The minimum records will display for
30 seconds before returning to the normal display
mode.
2. Press the OUT button again (once while "MIN" is
still displayed, twice otherwise). "MAX" appears
above the outdoor temperature and the LCD will
flash, indicating that the maximum temperature
and the time and date of occurrence are
displayed.
OUTDOOR
MIN
3. While "MAX" is still displayed press the OUT
MAX
HUMIDITY
button again to return to the current data display.
%
Or you can wait 30 seconds, during either the
minimum or the maximum readings, and the unit
RH
will automatically return to current data readings.
C. RESETTING THE MIMIMUM AND MAXIMUM
RECORDS
1. All the Indoor records (minimum and maximum)
will be reset after the IN button is pressed and
held for 5 seconds.
2. All the Outdoor records (minimum and maximum)
will be reset after the OUT button is pressed and
held for 5 seconds.
IV. ADDING REMOTE TEMPERATURE SENSORS
(OPTIONAL)
The WS-7215U is able to receive signals from 3
different remote temperature sensors. The remote
temperature sensor model(s) that you choose will
come with their own set of instructions-follow these
instructions for a complete guide to setting up.
Following are some brief instructions for the basic
TIME EST
DATE
INDOOR
HUMIDITY
%
RH
Satellite icon
OUTDOOR
(indicates
2
outdoor
transmission)
Sensor
Identification
number
GB
P.15
OUTDOOR
MAX
2
2
GB
P.17
Publicidad
Capítulos
