Briteq BTX-FALCON Manual De Instrucciones página 15

ENGLISH
13
14
15
16
17
Note (*): function delay is set to 3seconds, the selected function will only be active while the corresponding
DMX-value is received during at least 3seconds.
ROTATING GOBOS (GOBO WHEEL1 – CHANNEL 10
Gobo wheel 1 contains 7 standard rotating gobos (gobo size: 26,8mm – image size: 22,0mm)
These gobos can be replace by your own custom gobos, both metal and glass gobos can be used.
Replacing the gobos:
 Switch the projector off, unplug the power cable and wait until the unit is cool.
 Remove the plastic cover of the head using a Phillips screwdriver (PH2)
 Locate the gobo wheel with rotating gobos.
 Each of the rotating gobos is mounted in a separate holder that can be easily removed from the wheel
just by lifting it up a little and tear it out.
 The gobo is fixed in the holder using a wire clip: remove the wire clip gently.
 Remove the gobo and replace it by a new one
 Put the wire clip back in place and click the holder back in the gobo wheel.
 Put the plastic cover of the head back in place using a Phillips screwdriver (PH2)
 Done.
BRITEQ
®
194 - 255 Gobo wheel turning counter clockwise (slow → fast)
Prism on/off
000 - 127 Prism effect OFF
128 - 255 Prism effect ON
Prism - rotation
000 - 127 indexed positioning: 0° - 360°
128 - 189 Prism turning clockwise (fast → slow)
190 - 193 Prism stops turning
194 - 255 Prism turning counter clockwise (slow → fast)
Iris (maximum to minimum)
000 - 255
Focus (close to distant)
000 - 255
Special functions
000 - 069 No function
070 - 079 Activate blackout during pan/tilt (*)
080 - 089 Disable blackout during pan/tilt (*)
090 - 099 Activate blackout during color change (*)
100 - 109 Disable blackout during color change (*)
110 - 119 Activate blackout during gobo change (*)
120 - 129 Disable blackout during gobo change (*)
130 - 139 No function
140 - 149 Pan/tilt reset (*)
150 - 159 Color reset (*)
160 - 169 Gobo reset (*)
170 - 179 No function
180 - 189 Focus reset (*)
190 - 199 No function
200 - 209 Reset all (*)
210 - 219 Activate blackout during gobo/color or pan/tilt change (*)
220 - 229 Disable blackout during gobo/color or pan/tilt change (*)
230 - 255 No function
13/79
OPERATION MANUAL
BTX-FALCON