Service
The machine must be switched off and unplugged
for cleaning and maintenance. Fluids should not
come into contact with the motor.
The fine filter should be changed at least once per
year. Use only original spare parts. The microfilter/
HEPA filter, should be changed every 300 running
hours.
NOTE! Do not use any tool/instrument when
replacing the filter, as this may damage the
filter's sealing surface.
Use breathing protection during a filter change.
The operation should be performed in a closed
area. Used filters should be sealed in a plastic
sack and disposed of properly.
Check regularly that the electrical cable is not
damaged.
Accessories
Description
Coupling socket
Coupling socket
Hose std Ø=50 per mtr
HEPA filter
Fine filter, polyester,
with integrated filter cover
Fine filter cellulose
Warranty
The warranty period for this machine is two years
and covers manufacturers faults. The warranty is
valid under the condition that the machine is used
under normal conditions on the task for which it
was designed and is maintained properly. Normal
wear is not covered by this warranty.
2018-02-23
The DC Tromb 400 should be performance tested
at least once per year because it may be used with
hazardous materials. Worn parts must be repla-
ced. Never compromise the function of the DC
Tromb 400, use only original spare parts.
For vacuum motor the typical average life of the
original brushes is 600 - 700 hours. They can then
be exchanged or complete motor/fan replaced.
For 2nd brush set life is ca. 400 hours and for 3rd
brush set ca. 300 hours. After that the commutator
is worn out and the motor needs to be replaced.
Part no
Description
2107
Plastic sack, 50 pieces
2129
Intellibag, 10 pieces/roll
2401
Fold bag longopac
44016
44017
44043
Other accessories — see Dustcontrol catalogue.
Service performed by other than Dustcontrol or its
authorized agent voids automatically the warranty.
No other warranty express or implied is applicable.
DC Tromb 400a/c/L- 16
Part no
4314
43619
432177
Part No 9480-H