Look 675 Manual De Montaje página 10

EN
LOOK HsC 675 FOrK
The LOOK forks comprise a conical roller bearing surface, designed to receive it directly, the-
reby eliminating the need for a traditional fork cone.
They conform to the EN 14 781 standard.
Fig. a
Cutting line
Conical flange collar 36°
Diam 1''1/2
18
LOOK Head FIt 4 InteGrated Headset
specific feature of the headset:
The new LOOK Head Fit 4 headset is a patented system offering several improvements.
It makes it possible to dissociate the adjustment of the headset from the adjustment of the
stem. These two functions become independent of each other, which allows for simpler
adjustment of the stem and better precision of the adjustment of the headset.
Moreover, this increases the working life of the bearings of the headset when substantial
force is applied to the handlebar.
desCrIPtIOn OF tHe Headset:
LOWER PART:
• Single-piece bearing 36° x 45°, outside
diameter 52 mm.
UPPER PART:
• Single-piece bearing 36° x 45°, outside
diameter 41 mm.
• Bearing compression cone 1''1/8
• Pin
• tightening nut
• Pin hole plug
EN
Stem cap
Compression kit
Stem
Rubber spacer
Tightening nut
Pin and plugs
Threaded insert
Compression cone
Upper bearing ring
HEad tuBE
Lower bearing
ring
Fork
Fig. b
19