Aleratec 1:3 DVD/CD Auto Publisher LS Guia De Inicio Rapido página 12

Autoloader Alignment
1. Click on the "Calibration..."
button to access the various
alignment parameters on your
1:3 DVD/CD Auto Publisher
LS. There should be no disc in
any of the recorders to start.
Note: To realign a previously installed autoloader, click on the
"Recorder" menu and select "Robotics." On the "Tests" tab of this
dialog box, click the "Calibration..." button and proceed to the next
step.
2. Each of the alignment
parameters can be selected from
the "Alignment Procedure"
drop-down box. Remember to
click "Accept" when you are
satisfied with each position,
before selecting the next
alignment parameter or clicking
"OK."
3. First, select the "Angle of
Robotic Arm" from the
"Alignment Procedure" drop-
down box. The top tray will be
ejected and the robotic arm will
move to the default position for
this alignment procedure.
10 www.aleratec.com