SOMFY 121253A Guia De Instalacion página 13

Carry out an intrusion test or intrusion attempt once this
stage is finished to check that the opening and shock
detector is functioning correctly. The indicator turns red
to indicate detection.
Deactivating the programming
To reset the opening and shock detector settings, unclip the
front panel of the unit and press the calibration (C) button for 10
seconds; the indicator light will come on then go out.
Resetting the opening and shock detector
To delete the opening and shock detector from the TaHoma,
unclip the front panel of the unit, and press the programming
button (P) for 10 seconds; the indicator light will come on then
go out.
Somfy hereby declares that this product is in
compliance with the requirements of Directive
2014/53/EU. The full text of the Declaration of
Conformity is available at www.somfy.com/ce.
Recycling
Do not dispose of this product with the household
waste. Please take it to a collection point or an
approved centre to ensure it is recycled correctly.
Ensure batteries are separated from other types
of waste and are recycled via your local recycling
centre.
The images contained in this booklet are for illustrative
purposes only.
Copyright © 2016 Somfy SAS. All rights reserved.
13