Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions – WaveStream Linear
4.
To install waveguide assemblies repeat the steps 4 to 9
from Row Mount Installation.
5.
The Rowtrim includes the sensor preassembled.
Connect the RJ11 cable coming from the end of the
fixture to the pigtail in the sensor. Snap Rowtrim in
place. Assure all wiring is covered in the Rowtrim.
Figure 42.
Sensor Preassembled
Figure 43.
10
COOPER LIGHTING SOLUTIONS
Rowtrim
Pigtail
RJ11
Installation instruction
IB519017EN
Publicidad
