Publicidad
Idiomas disponibles
Idiomas disponibles
Emergency Installation – end of row
Battery Backup Option Section
The endcap includes the test switch preassembled.
Connect the harness on the end of the fixture to the test
switch. Snap endcap in place per the standard installation
instructions. Tuck wire harnesses and safety cable while
installing. Endcap tabs must fully engage in the metal
bracket. (Figure 31.)
Test according to the instructions in the battery pack.
Figure 30. Test switch Preassembled
Location for Test switch
Sheet metal Bracket in
Waveguide
Figure 31.
Fixture harness
Endcap Tab
Installation Instructions – WaveStream Linear
Emergency Installation – middle of row
Battery Backup Option Section
The Rowtrim includes the test switch preassembled.
Connect the harness on the end of the fixture to the
test switch. Tuck wire harnesses and safety cable while
installing. Snap Rowtrim in place. (Figure 33.)
Test according to the instructions in the battery pack.
Figure 32.
Test switch Preassembled
Figure 33.
COOPER LIGHTING SOLUTIONS
Fixture harness
Location for
Test switch
IB519017EN
Installation instructions
Rowtrim
7
Publicidad
