Metalux WaveStream Instrucciones De Instalación página 4

Installation Instructions – WaveStream Linear
7 . For 8ft fixture two sets of waveguide assemblies are
included. Repeat steps 3 to 6.
8. Remove protective film from the waveguide. Install Trim
provided, between waveguides. (Figure 14.)
Row trim
Figure 14.
9. Tuck wire harnesses between waveguides.
10. Remove endcaps from parts box, install Endcap to
fixture. Tuck wire harnesses and safety cable while
installing. Endcap tabs must fully engage in the metal
bracket. (Figure 15.)
4
COOPER LIGHTING SOLUTIONS Installation instruction
IB519017EN
Sheet metal
Bracket in
Waveguide
Figure 15.
Endcap
Endcap Tab