Cleaning And Maintenance; Preparation For A Prolonged Out Of Use; Instructions In The Event Of Faults - Multi SCCP-72EM Guia Para La Intalación E Instrucciones De Uso

To clean stainless steel do not use steel wool or wire brushes, as they can deposit ferrous particles which lead to rust
through oxidation.
To remove cured residues, use wooden or plastic spatulas, or abrasive rubber soap.
During long periods of inactivity, spread a protective film on all stainless steel surfaces by wiping with a cloth soaked in
vasoline oil, and ventilate the premises periodically.
Do not use products that contain harmful substances, hazardous to human health (solvents, gasoline, etc.).
Do not use oil to lubricate the basket lift shaft.
At the end of each day it is advisable to clean the following:
•
The basket lift shaft
•
The equipment.
Periodically, have qualified personnel do as follows:
•
Verify the efficiency of the electrical system
•
Replace the shaft wiper at least every 6 months.
•
Verify the correct operation of the timer and switches.
•
Verify the height in mm, indicated in the drawing, which must be respected.
Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry
cloth. Do not use abrasive or corrosive detergents.
Important: As well as ordinary cleaning and maintenance, it is advisable to have the installation checked by an
installer at least once a year.
It is therefore suggested to draw up an after-sales assistance contract.

PREPARATION FOR A PROLONGED OUT OF USE

Thoroughly clean and dry the appliance as per instructions, switch off at the mains.
If a fault develops, turn off the appliance, switch off at the mains and call the technical assistance service.
GB

CLEANING AND MAINTENANCE

INSTRUCTIONS IN THE EVENT OF FAULTS

IE
29