Skin Sensitivity Test; How To Use Me - Me Smooth Guia Del Usuario

setting up
1. Connect the power cord into the back of the base unit.
1
2. Connect the power cord to an electrical outlet.
Make sure that the applicator is placed inside its cradle.
2
3. Press the power button to turn the system on. Wait until the
indicator next to the power button turns green.
Now the system is ready for use.
3

skin sensitivity test

If you are using the system for the first time or on a new body area, choose a
small area close to the area you intend to treat, for the purpose of performing
a skin sensitivity test.
1. Use the LOW elo ˉ s level.
2. Follow the pretreatment and treatment instructions below to treat the small
area you've chosen.
3. After the skin test, wait 30 minutes and check your skin for any reaction.
4. If the treated spot appears to be red please wait 24 hours and repeat the test.
9 EN
how to use
If this is your first time using the device, be sure to conduct the Skin Sensitivity Test
described on page 9.
preparation
To prepare for your me treatment, first shave the area that you want to treat.
•
Wipe clean and dry the area. This will ensure that the elo ˉ s energy is focused on
the hair follicles beneath the surface for optimal efficacy.
• If you have fair hair it is recommended that you wax or epilate immediately
before treating with the me in order to get the best results.
• If you are treating the face, you can shave, wax or epilate before treatment.
activate me ˉ
• Press the power button to turn on your me system.
Select your elo ˉ s energy level (1). Always start on Low and
•
if you are comfortable move to Medium or High for even
greater efficacy. The device will not activate if you do not
select an elo ˉs level.
1
• Remove the applicator from the base.
• Press the elo ˉs activation button located on the back of the
applicator. The button will turn blue and you will hear the
fan start inside the applicator (2).
2
EN 10