Disposal/Recycling; Travel With Me; Troubleshooting - Me Smooth Guia Del Usuario

Ocultar thumbs Ver también para Smooth:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

disposal/recycling

Please follow the regulations where you live for disposal of electric systems when
recycling or disposing of your base unit, hand piece or disposable cartridge. If
you have questions, please contact us at www.mepower.com/contactus.
If you don't have a new cartridge, make sure you place the protective cap in
place of the used cartridge to protect the system inner parts.
Waste Electrical and Electronic Equipment (WEEE)
travel with
The me system is designed with universal voltage. That means that you can use
the system all over the world. You will need to use an adaptor for the plug, since
electrical wall outlets vary by country. Make sure the me system does not get wet
while traveling and do not use it in a wet environment.
15
EN

troubleshooting

Indicator
What does it mean
No lights are on
Power cable is not connected Connect power cable
All
energy setting
No
energy level was
buttons on the base
selected
are blinking
(High-Medium-Low)
activation button
energy level was selected
on the applicator is
but
activation button was
blinking
not pressed yet
Error light is on
Need to reset the system
No flashes are coming
1. Silver RF contact bars not
out of the applicator
in contact with the skin in
treatment area
2.
activation button was
not pressed
3.
energy level was not
selected
How to react
Device
Select an
level.
Press the
activation button. The
applicator fan will start blowing indicating
that the
cartridge is active.
Reset the system by turning it off and on
again.
If problem persists, disconnect power cord
and wait until all lights are off (several
seconds). Then reconnect the power cord
and turn on system.
If error light is still on, try moving to a cooler
area with a room temperature of less than
30ºC/ 86ºF and restart the system.
In order for the system to flash pulses, make
sure that the following 3 conditions are
met:
level is selected,
activation
button is pressed, silver RF contact bars are
in contact with skin.
EN
16

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Me Smooth

Tabla de contenido