Symbols On The Product; Product Information; Declaration Of Conformity - Hilti TE 3000-AVR Manual Del Usuario

These numbers refer to the corresponding illustrations found at the
beginning of these operating instructions
The numbering reflects the sequence of operations shown in the
illustrations and may deviate from the steps described in the text
Item reference numbers are used in the overview illustrations and
refer to the numbers used in the product overview section
This symbol is intended to draw special attention to certain points
when handling the product.

1.3 Symbols on the product

1.3.1 Symbols on the product
The following symbols can be used on the product:
Protection class II (double-insulated)
Transport by crane is not permissible
Wireless data transfer

1.4 Product information

Hilti products are designed for professional use and may be operated, ser-
viced and maintained only by trained, authorized personnel. This personnel
must be informed of any particular hazards that may be encountered. The
product and its ancillary equipment may present hazards when used incor-
rectly by untrained personnel or when used not as directed.
The type designation and serial number are printed on the type identification
plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to enquire about the product.
Product information → page 2
Product information
Breaker
Generation
Serial no.

1.5 Declaration of conformity

We declare, on our sole responsibility, that the product described here
complies with the applicable directives and standards.
declaration issued by the certification department can be found at the end
of this documentation.
The technical documentation is filed here:
2 English
Printed: 05.02.2019 | Doc-Nr: PUB / 5364012 / 000 / 01
TE 3000­AVR
01
A copy of the
2190684
*2190684*