Important Information - Read Prior To Start-Up; Purpose; Design; Components - Riester metpak Serie Instrucciones Para El Uso

1. Important information - read
prior to start-up
You have acquired a valuable RIESTER product manufactured
in compliance with Directive 93/42/EEC for medical products
and subject to continuous stringent quality control, whose ex-
cellent quality will ensure reliable diagnoses.
Should you have any queries, please contact the Company or
your RIESTER Agent who will be pleased to assist you. For
addresses see last page of these Operating Instructions. The
address of your authorised RIESTER Agent will be supplied to
you on request.
Please note that any products described in these Operating
Instructions are only suited for application by trained operators.
Please also note that correct and safe operation of instruments
will only be guaranteed when RIESTER products and accesso-
ries are used throughout.

2. Purpose

RIESTER's Metpak has been manufactured for pressurised
infusion of solutions and blood in plastic bags.

3. Design

2 Metpak models are available:
• Item No. 5270 Metpak for 500 ml
• Item No. 5275 Metpak for 1000 ml

4. Components

4.1. Cuff sleeve and net insert
4.2. Rear suspension loop
4.3. Front suspension loop
4.4. Manometer
4.5. Air release valve
4.6. Bulb

5. Commissioning and operation

5.1. Ensure that you have acquired the correct Metpak model
for infusion bags containing blood or solutions, which are
used by you (see 3.).
5.2. Check connection between the bulb (4.6.), the air release
valve (4.5.) (fan) and the tube.
5.3. Close air release valve (4.5.).
5.4. Lift net insert on the sleeve. Slide infusion bag underneath
the net insert, with the bag opening directed downwards
until the front suspension loop allows threading into the
opening of the bag.
5.5. Thread rear suspension loop through front suspension loop
9