Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
START-UP
CAUTION: on initial start-up, fill the pump intake line before powering up the system!
After making all the electrical connections and ensuring the correct condition of all components, close the
unit cover and power up the system.
Brio Top starts up the pump automatically to enable circuit filling.
If the pump does not start, or anomalous vibrations are detected, ensure correct connection of the pump
and relative capacitor.
To facilitate filling of the electric pump, press and hold the "+" key on the main screen to override
pump operation without intervention of the dry-running protection ("Manual" mode).
After setting all data in the device, note them on the relative form found at the end of this manual
for future reference and to maintain the guarantee.
PROGRAMMING:
INTERFACE DESCRIPTION
1. Display with digital pressure indicator,
error display, configuration menus.
2. Programming keys
3. Green mains power ON indicator light (LINE)
4. Red error indicator light (ERROR)
5. Yellow "pump running" indicator light (PUMP ON)
KEY DESCRIPTION
Arrow/reset: scrolls forward through menus and performs unit reset in the event of alarms and/or
errors
"+" key: increments the parameter value currently on display; enables
device operation override (starts pump as an override command and temporarily disables
the dry-running protection to facilitate loading on initial start-up).
"-" key: decreases the parameter value currently on display; shows the absorbed current (optional)
DESCRIPTION OF PARAMETERS AND SCREENS
The menu is divided into two levels: the user level and the installer level. The user level is usually visible
during normal operation and enables the user to control the system operating status, reset any errors and
modify the language. To access the installer level, where the various operating parameters can be set,
press keys "+" and "-" simultaneously for 5 seconds.
IT
EN
F
DE
E
1
4
5
3
PT
SK
CZ
2
RUS
RO
Publicidad
Tabla de contenido
