Chemical and biological safety
D A N G E R
Potential danger in the event of contact with chemical/biological materials.
Handling chemical samples, standards and reagents can be dangerous.
Familiarise yourself with the necessary safety procedures and the correct
handling of the chemicals before the work and read and follow all relevant safety
data sheets.
Normal operation of this instrument may involve the use of hazardous
chemicals or biologically harmful samples.
•
Observe all cautionary information printed on the original solution
containers and safety data sheet prior to their use.
•
Dispose of all consumed solutions in accordance with national
regulations and laws.
•
Select the type of protective equipment suitable to the concentration
and quantity of the dangerous material at the respective work place.
Overview of product
The carousel insert (sample changer) is available in two designs:
•
The 10 mm carousel insert (sample changer) can be equipped with
up to seven 10 mm square cells.
•
The 1 inch carousel insert (sample changer) can be equipped with
up to five 1 inch square cells.
Various combinations of sample and blank value cells are possible.
These combinations are defined with the corresponding carousel options
before measuring.
English 44
Installation
Insert the carousel insert (sample changer)
1.
Open the cell compartment.
2.
Remove the universal cell adapter.
3.
Insert the carousel insert (sample changer) so that the arrow on the
insert points left in the direction of the round cell compartment.
4.
Press the carousel insert down until it snaps into place.
Figure 1 Insert the carousel insert