HACH LANGE LZV902 Manual Del Usuario página 46

7. Start the measurement by pressing Read Carousel 1.
The first carousel insert is measured and the results displayed.
8. Remove the carousel insert or cells and load carousel insert 2 with
samples.
9. Start the measurement by pressing Read Carousel 2.
The second carousel insert is measured and the results displayed.
Continue until all samples have been measured.
Note: If Instrument Setup > Data Log Setup > Auto Store: On has
been selected, all measurement data is automatically saved. The
measurement data can be accessed under Recall data > Data Log.
Import an external sample ID
1. Create an external sample ID list with a spreadsheet program.
Four columns are permitted; column 1 contains the sequential
number, column 2 the sample designation, columns 3 and 4 are
optional.
Headings and comment lines must begin with #.
2. Create a folder named "SampleID" on a USB stick or in your
established network.
3. Save the sample ID list in CSV or UNICODE-TXT format in the
"SampleID" folder with Save as.
4. Connect the DR6000 to the USB stick or network.
All *.TXT and *.CSV files in the SampleID folder will be displayed for
selection.
5. Select the desired file with OK.
6. Transfer the displayed sample ID list with Done.
Single wavelength
1. Press Single Wavelength in the main menu.
2. Press Options > More > Reading mode.
3. Select Carousel 1 inch square or Carousel 10 mm square.
4. In the toolbar, select the symbol for the carousel insert. This symbol
opens a window with carousel options; refer to
English 46
Table 2 Carousel options
Options
Carousel 1 inch
square
Zero 1 Read 1–5
Zero 1–5
Read 1–5
Zero 1 Read 2–5
Zero 1, 3
Read 2, 4
Table 2.
Options
Description
Carousel 10 mm
square
Position 1 zero solution, from position 1 to
5 (or 7) samples
Zero 1 Read 1–7
Measurement stops after the zero
measurement. Afterwards, the carousel
insert is measured one a work step.
Position 1 to 5 (or 7) zero solutions,
position 1 to 5 (or 7) samples.
Zero 1–7
Measurement stops after all zero
Read 1–7
measurements. Afterwards, the samples
are measured in a further work step.
Position 1 zero solution, from position 2 to
5 (or 7) samples.
Zero 1 Read 2–7
Carousel insert is measured in one work
step.
Always alternating. First zero solution,
then sample.
Zero 1, 3, 5
Read 2, 4, 6
Carousel insert is measured in one work
step.