Install The Balance With Density Measurement Device; Connect The Power Adaptor; Install The External Facilities - Gram FD Serie Manual De Utilización

Install the balance with density measurement device

1. Bracket
2. Beaker holder
3. Beaker
4. Convex holder (concave holder)
1. Put the bracket on the balance and adjust it to the right angle.
2. Put the beaker support and beaker onto the bracket in proper sequence.
3. Fill the beaker 5mm from the rim of it.
4. Test the temperature of liquid with thermometer.
5. Choose the right holder and hang it on the holder.

Connect the Power Adaptor

Only the power adaptor offered by us is allowed.
• Connect the power adaptor to the balance
• Connect the power adaptor to the power socket

Install the External Facilities

Make sure to turn off the balance before connect it or disconnect it with
external facilities (such as printer or computer)
10
1
2
3
4
5