Set Baud Rate And Calibration Mode - Gram FD Serie Manual De Utilización

Users can set up Line Feed for label printing.
※ Printing mode and line feed numbers set apart, after setting up printing
mode, line feed numbers can be set.
Please set up printing mode according to below steps:
1. Press the
2. Press
stabilize the output.
3. Press
for confirmation.
4. After enter into menu, press
press
key repeatedly to check the preset time interval, then press
confirmation. If to choose "0 SEC", it means Continuous Output.
5. Press
6. Enter into Print Setup Menu, press
Feed to set up "LinEFd".
7. Press
After choosing proper line feed numbers, press
to normal weighing mode.

SET bAUD RATE AND CALIbRATION MODE

1. Press
2. Press
18
key, the display will show "PrInT".
key to enter into menu, "STAbLE" displayed, default is to
key to choose printing mode you would like, press
key for confirmation, balance displays "0 SEC", press
key to back to normal weighing mode.
key repeatedly to check the preset line feed numbers (1-18).
key for entering into Menu Setup Mode.
key repeatedly till "bAud" displayed.
key to choose Line Feed "InTEr",
key repeatedly, choose Line
key for choice, back
key
key for