Light Control; Plasmacluster Ion On/Off; Adjustment Of Sensor Detection Sensitivity - Sharp UA-PG50E Operación Manual

LIGHT CONTROL

You can turn off the DUST AND ODOUR /PLASMACLUSTER SIGN when they are lighting up.
ON
more than 3 sec.

PLASMACLUSTER ION ON/OFF

When Plasmacluster Ion is ON, the PLASMACLUSTER SIGN will turn on. (blue)
(In operation)
ON
more than 3 sec.

ADJUSTMENT OF SENSOR DETECTION SENSITIVITY

Set to "Low" if the DUST AND ODOUR SIGN is constantly red to reduce sensitivity,
and set to "High" if the DUST AND ODOUR SIGN is constantly green to increase sensitivity.
(with the unit OFF)
1
more than 3 sec.
2
Select the
sensor detection
sensitivity.
3
OFF
more than 3 sec.
OFF
more than 3 sec.
High
Standard
Low
E-7
NOTE
• When the unit restarts its
operation, Light Control
resumes its setting set before
turning off .
• At Sleep Mode, Light Control
is available.
NOTE
• If the Power ON/OFF Button is
not pressed within 8 seconds of
adjusting sensor sensitivity, the
setting will be saved automatically.
• The sensor sensitivity setting
will be saved even if the unit is
unplugged.