Troubleshooting Guide - Scheppach MTE460 Traducción De Las Instrucciones Originales De Funcionamiento

Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
Wear parts*: Brush Assemblies, Blade Roller
* Not necessarily included in the scope of delivery!

14. Troubleshooting guide

Fault Possible causes
Motor does not start • No electricity in plug
• Cable defective
• Switch, switch/plug block defective
• Connections to motor or capacitor
disconnected
• Blade roller blocked
Engine performance • Soil is too firm
drops • Carbonbrushes worn out
• Roller badly worn
The Electric Tiller is • roller worn
difficult to check. • Wrong working depth
Motor is running, roller • Gearing defective
is not rotating
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Rectification
• Check line and fuse
• Have machine checked by a customer service
center
• Have machine checked by a customer service
center
• Have machine checked by a customer service
center
• If necessary adjust working depth. Clean housing
so that the roller can run freely
• Change working depth
• Check by a customer service center
• Replace roller
• Replace roller
• Correct working depth
• By customer service workshop
GB | 29