Idexx Quanti-Tray Sealer PLUS Manual De Usuario página 4

Setting Up the Sealer
• Unpack the contents and save packaging for future shipping.
• Position the sealer on a level surface with the display facing you and with adequate space for trays to be inserted and ejected.
• Ensure that the power switch is turned off.
• Plug the power cord into the sealer and then into a grounded outlet of proper voltage (see product label).
• To connect the optional input shelf, center the holes over the corresponding tabs and press down.
Status light
Reverse button
Upper access door
Input slot
Fuse box
Power switch
Understanding the Sealer Display
Amber bars
Counter
Counter: Number of trays that have been run through the sealer.
Amber bars: Sealer is warming up.
Green bar: Sealer has warmed to sealing temperature.
Moon icon : Sleep mode is enabled. See the "Using Sleep Mode" section of this manual.
Alert icon with error code
2
Sleep mode button
: See the "Troubleshooting" section of this manual.
Input shelf
Rubber insert with Quanti-Tray
Lower access panel
Exit slot
Fan
Green bar
Moon (sleep)
Alert