Operation - Home Depot Home Decorators Collection 51560 Guía De Uso Y Cuidado

Operating Your Fan and Remote Control (continued)
1. Fan button. - Press and release the
Press and hold the
Fan on. The fan memory function will resume the speed set on the fan prior to the power being turned off. The LED bar will display
the current settings for 5 seconds after the button is released.
Note: If you are currently using Comfort Breeze
normal fan operation.
Fan off. The fan memory function will store the current setting for the next time the fan is in use.
Note: You must turn the fan on prior to using the timer function.
2. Speed functions
+ button, increases the fan speed
Pressing and releasing the + button one time will increase the speed of the fan. Each setting increase will cause the LED bar to
illuminate slightly more, until the fan has reached the maximum speed setting, at that time the LED bar will be fully illuminated.
Pressing and holding the + button will increase the fan speed automatically through the speed settings and the increments will be
denoted on the LED bar. When the LED bar is fully illuminated, the fan has reached maximum speed setting.
Pressing the + button while in Comfort Breeze
fan operation.
– button, decreases fan speed
Pressing and releasing the - button one time will decrease the speed of the fan. Each setting decrease will cause the LED bar
to dim slightly more, until the fan has reached the minimum speed setting. At that time the LED bar will be approximately 25%
illuminated.
Pressing and holding the - button will decrease the fan speed automatically through the speed settings and the increments will be
denoted on the LED bar. When the LED bar is 25% illuminated, the fan has reached the minimum speed setting.
Pressing the - button while in Comfort Breeze
fan operation.
3. Comfort Breeze TM
There are three Comfort Breeze
illuminate slowly from bottom to top to display the current setting.
Setting 1: Alternates through speeds 1 – 3, the LED bar should fill approximately 33%.
Setting 2: Alternates through speeds 1 – 6, the LED bar should fill approximately 66%.
Setting 3: Alternates through speeds 1 – 9, the LED bar should be fully illuminated.
Off
button to turn the fan on or off.
button for 5 seconds to enter the learning function.
TM mode will automatically cancel the Comfort Breeze
TM mode will automatically cancel the Comfort Breeze
TM settings. Pressing the
Setting 1 Setting 2
TM mode, pressing the button will cancel Comfort Breeze
button will activate the Comfort Breeze
Setting 3
17
TM mode and resume normal
TM mode and resume normal
TM mode and LED bar will
Disable Comfort Breeze
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
TM mode and resume
TM