Tools & Materials Required; Mounting Options - NuTone HUGGER Serie Manual De Instrucciones

CONTENTS
Unpack your fan and check the contents. You should have the following
items:
A - Blade set (5)
B - Mounting bracket
C - Fan motor assembly
D - Motor housing
E - Blade bracket set (5)
F - Package hardware
Pull chain and fob
TOOLS & MATERIALS
REQUIRED
FLAT
PHILLIPS
BLADE
SCREW SCREW
DRIVER
DRIVER

MOUNTING OPTIONS

If there isn't an existing UL listed mounting box, then read the following
instructions. Disconnect the power by removing fuses or turning off
circuit breakers.
Secure the outlet box directly to the building structure. Use appropriate
fasteners and building materials. The outlet box and its support must be
able to fully support the moving weight of the fan (at least 50 lbs). Do
not use plastic outlet boxes.
Figures 1 and 2 are examples of different ways to mount the outlet box.
To hang your fan where there is an existing fixture but no ceiling joist,
you may need an installation hanger bar as shown in Figure 3.
MODELS CFH52BS • CFH52PB • CFH52RB • CFH52WH
B
A
C
D
E
F
STEP WIRE
LADDER CUTTER
OUTLET BOX
FIGURE 1
OUTLET BOX
FIGURE 2
OUTLET BOX
FIGURE 3
Page 2