NuTone HUGGER Serie Manual De Instrucciones página 3

INSTALL THE FAN
1. Attach the mounting bracket to the outlet box using the two screws
and washers provided with the outlet box. (Fig. 4). For best
performance be sure the mounting bracket is level and secured firmly
against the ceiling. You may need to insert additional washers (not
provided) between the outlet box and mounting bracket to make it
level.
2. Carefully lift the fan motor assembly (without the blades) and insert
the T section of the motor housing plate into the slot in the mounting
bracket as shown in Fig. 5.
MODELS CFH52BS • CFH52PB • CFH52RB • CFH52WH
OUTLET BOX
FAN MOTOR
OUTLET BOX
SCREWS
FIGURE 4
SLOT
FIGURE 5
Page 3
MOUNTING
BRACKET