Stanley CL2XTi Manual De Instrucciones página 13

Applications
77-121
1. Plumb:
Using the vertical laser beam, establish a
vertical reference plane. Position the desired
object(s) until they are aligned with the
vertical reference plane to ensure object(s)
are plumb.
2. Level:
Using the horizontal laser beam, establish
a horizontal reference plane. Position the
desired object(s) until they are aligned with
the horizontal reference plane to ensure
object(s) are level.
3. Square:
Using both the vertical and horizontal laser
beams, establish a point where the vertical
and horizontal beams cross. Position the
desired object(s) until they are aligned with
both the vertical and horizontal laser beams
to ensure object(s) are square.
4. Pulse Mode:
Setting laser unit to pulse mode allows use
of optional laser detectors.
5. Manual Mode:
Disables self-leveling function and allows
laser unit to project a rigid laser beam in any
orientation.
13