Packing List - Freeman P12IW Manual Del Usuario

Always inspect electrical cord for damage
before and after use. A damaged cord can cause
electrical shock.
TOOL USE AND CARE
Know this tool. Read this manual carefully, learn
its applications and limitations, as well as the
specific potential hazards related to this tool.
Always have a firm footing and grip on the tool
to counteract any force that may be enacted
during the operation of the tool.
Practice safe working practices and ensure all
relevant legal requirements are being followed
when using this tool.
The tool should not be forced, use the correct
tool for your application. The correct tool will do
the job better and safer at the rate for which the tool
is being used.
Before adjustments, changing accessories, or
storing the tool disconnect the tool from the
battery. This will reduce the risk of injury from the
power tool.
Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the tool's operation. If
damaged, have the tool serviced before using.
Many accidents are caused by poorly
maintained tools. Maintain tool with care. A
properly maintained tool will function more smooth-
ly and prevent binding, making it easier to use.
Do not use the tool for anything other than its
intended use.
Do not use the tool if the trigger does not
actuate properly. Any tool that cannot be
controlled with the trigger is dangerous and must
be repaired.
Keep the tool and its handle dry, clean and free
of oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any strong solvents
to clean your tool.
Never use gasoline or other flammable liquids
to clean the tool. Never use the tool in the
presence of flammable liquids or gases. Vapors
could ignite by a spark and cause an explosion
which will result in death or serious injury.
Do not use the tool as a hammer.
Never press the trigger of the tool when it is not
intended to be used.
Do not drop or throw the tool. Dropping or
throwing the tool can result in damage that will
make the tool unusable or unsafe. If the tool has
been dropped or thrown, examine the tool closely
for bent, cracked or broken parts. STOP and repair
before using or serious injury could occur.
04
HTTP://WWW.FREEMANTOOLS.COM
MODEL: P12IW
BATTERY AND CHARGER USE AND
CARE
Only use batteries that are recommended for
this tool by the manufacturer. Use of any other
battery may cause risk of injury or fire.
When the battery is not in use, keep it away
from metal objects that could connect one
terminal to another. If the terminals are connect-
ed the battery could cause fire or burns.
Keep the battery free of abusive situations, if a
battery is damaged it can eject battery liquid. If
you come in contact with the battery liquid flush the
contact area with water. If your eye comes in
contact with the battery liquid flush with water and
seek medical help. Battery liquid can cause
irritation or burns.
Do not store batteries in areas that can reach or
exceed 105°F. (Such as outside sheds or metal
buildings in the summer).
Only charge the battery with a charger recom-
mended by the manufacturer. Use of any other
charger may cause risk of injury or fire.
Do not use chargers for anything other than
charging manufacturer recommended
batteries, otherwise electric shock could occur.
Do not expose the charger to rain or snow.
Make sure the charger's cord is located in an
area where it will not be damaged.
Extension cords should not be used unless
absolutely necessary. Improper use of an
extension cord can result in electric shock.
Do not place an object on top of the charger.
This could block ventilation slots and cause
excessive internal heat.
Do not use the charger if it has been subjected
to a hard blow, has been dropped, or damaged
otherwise. Take the charger to an authorized
repair center.
Do not disassemble the charger. If the charger
needs to be repaired take it to an authorized repair
center.
Before cleaning the charger make sure to
unplug it from any power source. This will
reduce the risk of an electrical shock.
WARNING:
Do not open the battery for any reason. If
the battery is damaged or cracked do not
insert it into the charger. Electric shock
can be caused by a damaged battery. Be
sure to dispose of all batteries at a
service center for recycling.
1-888-669-5672
MODEL: P12IW
WARNING:
Do not burn batteries or expose them to
extreme heat. This could cause the
battery to explode.
WARNING:
Do not allow liquid to get into the
charger, electric shock could result.
WARNING:
Electrocution hazard. Do not touch or
allow conductive objects to touch the
charging terminals. Electric shock or
electrocution could occur.
TOOL SERVICE
Only use accessories that are identified by the
manufacturer for the specific tool model.
Use of unauthorizeVd parts or failure to follow
maintenance instructions may create a risk of
injury.
Tool service must only be performed by a
qualified repair personnel.
UNPACKING
This tool has been shipped completely assembled.
Carefully remove the tool and any accessories from
the box.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-888-669-5672.
WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
serious personal injury.
HTTP://WWW.FREEMANTOOLS.COM

PACKING LIST

½" Brushless Impact Wrench
Two 2.0Ah Lithium-ion Batteries
Rapid Charger
Instruction Manual
SPECIFICATIONS
INPUT
100-240V, 50/60Hz
BATTERY 20V MAX., 2.0 Ah, 36Wh
NO-LOAD SPEED 1,300/2,000/2,500 RPM
TORQUE 110/160/230 ft-lb
CHARGING TIME 45 min
FEATURES
BRUSHLESS MOTOR
Delivers up to 230 ft-lbs of torque and a free
speed up to 2,500 RPM.
VARIABLE SPEED
Adjustable 3-speed plus reverse provides
precise control for a wide range of applications.
LITHIUM-ION BATTERIES
Two high-capacity 2.0Ah lithium-ion batteries
feature enhanced battery life.
COMPACT DESIGN
Ergonomic design allows access to tight areas
and reduces fatigue.
LED LIGHT
Three LED lights illuminate dimly lit work areas.
QUICK CHARGER
Fully charge batteries in under 45 minutes for
less downtime.
ACCESSORIES
Belt clip and storage case included.
1-888-669-5672
05