Palazzetti MULTIFIRE BIO 9-14 Manual De Instalación, Uso Y Mantenimiento página 51

10.2 "ECO MODE" SAVING FUNCTION
Enabling this function means that the stove switches off when reaching the desired room temperature. If this
function is not enabled, the stove modulates operation so as to maintain the desired temperature while consuming
To enable/disable the function:
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Select submenu
d) Set one of the following values using the
Eco
"Eco Mode" function enabled
Off
"Eco Mode" function disabled
e) Press
10.3 RESTART DELTA FUNCTION
The Restart delta is the number of degrees centigrade below the switch-off temperature at which the stove
switches on again automatically. For example, if the stove is set to switch off at 20°C (Eco Mode active) and
"Restart delta" is set to 4°C, the stove will switch on again when the temperature measured is less than or equal
to 16°C.
To set the restart delta value:
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Select submenu
d)
e) Press the
10.4 AUTONOMY FUNCTION
with pellets. Use the arrow buttons to move to the
on the stove.
The estimated values are quite reliable, as long "
completely. "Lo" indicates the reserve fuel level.
10.5 REFILL FUNCTION
In this way, the stove can estimate, based on the operating parameters, how many hours of autonomy remain
a) Use the arrow buttons
b) Use the buttons to select "
To disable this function, select "
10.6 RESTARTING AFTER A POWER FAILURE
In the event of power failures, the stove will switch back on automatically, checking the safety conditions, when
power returns.
USE AND & MAINTENANCE
(ONLY IN PELLET MODE)
to go to the setup menu
[7]
to go to the setup menu
[8]
and press
to move to the fuel icon
FULL
" and press enter
OFF
" instead of "
and then press
.
buttons:
and then press
0,5 ... 5,0°C
and buttons (
symbol and display the estimated operating hours before
FULL
and press ente
.
FULL
".
;
;
;
);
.
51