Palazzetti MULTIFIRE BIO 9-14 Manual De Instalación, Uso Y Mantenimiento página 52

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

10.7 "LOCK KEYPAD" FUNCTION
To enable/disable the function:
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Select submenu
d) Use the
Off
"
" Lock keypad disabled
"Lo" Only the on/off button
Hi
"
"
Lock keypad enabled
e) Press
10.8 FROST PROTECTION FUNCTION
A minimum temperature can be set below which the stove will switch on (outside of the set time bands, and only
if the timer is active). To set the "frost protection" temperature:
a) Use the arrow buttons
b) Use the
button to select the password "7" and then press
c) Select submenu
d)
e) Press
10.9 MANUAL ACTIVATION OF THE PELLET LOADING SYSTEM
activate the loading system to charge the circuit with pellets:
a) Use the arrow keys
b) Enter the password "7" with key
c) Select submenu
d) Enter password "54"
e) Hold down key
You can only run this procedure when the stove is off and completely cold.
10.10 MANUAL ACTIVATION OF THE MECHANICAL BRAZIER CLEANING SYSTEM
To manually active the mechanical brazier cleaning system, proceed as follows:
a) Use the arrow keys
b) Enter the password "7" with key
c) Select submenu
d) Enter password "54"
e) Hold down key
Only do this when the stove is off and completely cold.
52
USE AND & MAINTENANCE
to go to the setup menu
[ 1 0 ]
buttons to set one of the following values:
is enabled
to go to the setup menu
[9]
to enter the setup menu
[ 3 1 ]
to start the manual loading system.
to enter the setup menu
[ 3 2 ]
to start the manual loading system.
and then press
.
and then press
;
OFF
3 . . . 20°C
buttons (
;
);
and press key
;
;
and press key
;
;
;
;
;
;

Publicidad

Tabla de contenido
loading

Tabla de contenido