Topping Up The Engine Oil; Filling The Oil Bath Air Filter; Refueling The Tiller - Stihl MH 610 Manual De Instrucciones

Ocultar thumbs Ver también para MH 610:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7 Refueling the Tiller

► Turn the gearbox oil cap anti-clockwise until it can be
removed.
► Remove the gearbox oil cap.
► Add 0.95 l of SAE10W30 gearbox oil without spilling any.
► Place the gearbox oil cap on the filler neck.
► Turn the gearbox oil cap clockwise and hand tighten.
The filler neck is sealed.
6.9

Topping Up the Engine Oil

The engine oil lubricates and cools the engine.
The engine oil specification and capacity can be found in the
engine instruction manual.
NOTICE
The tiller does not contain any engine oil on delivery.
Starting the engine with no or too little engine oil may
damage the tiller.
► Always check the engine oil level before starting and if
necessary top up.
► Add the engine oil as described in the engine instruction
manual.

6.10 Filling the Oil Bath Air Filter

The oil bath air filter filters the air taken in by the engine.
0478-404-9902-A
NOTICE
The oil bath air filter does not contain any engine oil on
delivery. Starting the engine with no or too little engine oil in
the oil bath air filter may damage the tiller.
► Always check the engine oil level in the oil bath air filter
before starting and if necessary top up.
The engine oil specification and capacity can be found in the
engine instruction manual.
7 Refueling the Tiller
7.1
Refueling the Tiller
NOTICE
The tiller may be damaged if the correct fuel is not used.
► Observe the specifications in the engine instruction
manual.
► Stop the engine.
► Place the tiller on a level surface.
► Open the cover.
► Clean the area around the fuel tank cap with a damp cloth.
► Turn the fuel tank cap anti-clockwise until it can be
removed.
► Remove the fuel tank cap.
English
17

Publicidad

Tabla de contenido
loading

Tabla de contenido