Imesa ES10 Manual De Puesta En Marcha Y Mantenimiento página 18

E980702H 02/12/04
6. SAFETY DEVICE IN CASE OF
OVERHEATING.
If the temperature of the burner becomes too high,
a safety thermostat stops the heating system: the
drum goes on turning, but the burner doesn't
ignite. The thermostat must be reset manually
therefore in cases such as this you must: take off
all feeding connections, open the upper door on
the machine front and press the brown button on
the thermostat back fig. 7 (see below) for gas
heated machines and (if the thermostat is
installed) on electric heated machines.
If this problem occurs again, switch off gas and
power supply and call Techincal Assistance.
Pict. 7
18