6. To deactivate the lullabies directly on the
baby unit 1, press the button Lullabies
on/off 12.
Selecting the play mode
The 5 lullabies can be played in a random
sequence (shuffle mode) or one after the
other in set sequence (loop) to calm children
who prefer listening to alternating melodies
as opposed to the same one repeated. To
activate one of these playback modes, pro-
ceed as follows:
1. Follow steps 1 to 3 described above.
4. Use the
25 or
star in front of the shuffle/loop symbol.
Shuffle mode: the 5 lullabies are
played in a random order during
each sequence.
Loop mode: the 5 lullabies are
played one after the other in
unchanging numerical order in each
sequence.
At this point, you can still exit the sub-
menu by pressing the
submenu will close and you will be
returned to the previous submenu. How-
ever, to continue with your settings, con-
tinue with the next step.
5. Press the
button 26 to view the next
submenu.
6. Use the
25 or
star in front of the required setting: either
shuffle or loop.
7. Press the
button 26 to confirm your
setting.
The setting will be stored, the menu will
be closed, and the parent unit will return
directly to monitoring mode.
The corresponding symbol appears in the
status bar.
If you have also activated the timer, the
corresponding symbol in the status bar
will also show a "T".
Notes:
• If the timer function for the lullabies has
not been activated, the lullabies will con-
28 button to move the
button 27. The
28 button to move the
tinue to be played repeatedly until
switched off by you on the parent unit or
the baby unit (see "5.4 Playing the lulla-
bies" on page 54).
• After 15 seconds without any input from
you, the menu will be closed with the
settings unchanged and the parent unit
will return directly to monitoring mode.
Activating the timer
You can activate a timer for the lullabies to
avoid inadvertently playing them for an
unlimited time. The lullabies will play for the
set time and then automatically switch off.
To activate one of these playback modes,
proceed as follows:
Follow steps 1 to 3 described above.
4. Use the
25 or
star in front of "Timer".
At this point, you can still exit the sub-
menu by pressing the
submenu will close and you will be
returned to the previous submenu. How-
ever, to continue with your settings, con-
tinue with the next step.
5. Press the
submenu.
60 min: The lullabies will play for 60 min-
utes and then automatically switch off.
40 min: The lullabies will play for 40 min-
utes and then automatically switch off.
20 min: The lullabies will play for 20 min-
utes and then automatically switch off.
OFF: The timer will be deactivated.
6. Use the
25 or
star in front of the required setting.
Attention! If you have set the timer, but
forgotten to set the play mode (single lull-
aby, shuffle or loop), no lullabies will be
played.
Note: If you select only one lullaby, then
only this one lullaby will be played
repeatedly for the set time.
7. Press the
setting.
69
28 button to move the
button 27. The
button 26 to view the next
28 button to move the
button 26 to confirm your