Description Of Machine; Conditions Of Use - Mainca BC-2500 Manual De Instrucciones

DESCRIPTION OF MACHINE

The bandsaw consists of an electric motor, driving a drive pulley, which connects via, to the top pulley through the
blade. A stainless steel frame supports the whole assembly, with fixed covers at the back and a hinged removable
door at the front for ease of access for cleaning. This door incorporates a safety device, which cuts the power, if
the door is opened accidentally.
The standard configuration of the models BC-2000, BC1800 and BM-3000JV contains an automatic tightener.
Please check the function of safety switches before putting into operation.
For the operators protection the machine incorporates the following devices.
a) Hinged meat pusher, this is a metal U piece hinged at the top of the exposed blade area with a pusher knob
at the bottom of the U shaped guard.
b) Half-sliding table comprises a metal platform with a raised vertical component that covers the lower exposed
part of the blade, connected to a guide bar to facilitate lateral movement.
On both versions the bandsaw is supplied with an adjustable slice thickness stop plate that moves transversally to
the direction of cut.
Two buttons are situated on the left of the bedplate: the green button is the on switch and the red button is the off
and emergency switch.
A waste product tray is available to collect waste from the bottom pulley, included in BM-3000JV and BC-2500.
Before using machine, check the operation of emergency stop button.

CONDITIONS OF USE

This machine must not be applied for domestical use.
The user of the machine must receive a specific formation of use and read the manual before use the band saw.
The band saw is designed to cut fresh meat, bone and frozen meat as long as the correct band for, meat, bone or
frozen meat is fitted. It is also acceptable to cut fresh meat with a bone blade, if it is lamb, pork or veal.
For other cutting applications we do not recommend its use without prior consultation with the manufacturer.
Likewise, the machine must be used as described in the instructions contained in this manual.
The longevity of the band depends on what is being cut and to the amount of pressure exerted on it.
Nevertheless, as guide one should expect it to last between 1000 and 2000 Kg of cut product. In the case of meat
saws, you can obtain a longer life because you can reverse the band and benefit by using the other side of the
tooth.
To switch the machine on, it is essential to have read the instructions and follow them step by step. If in any doubt
contact your local dealer or Equipamientos Carnicos SL directly. The machine cannot be operated with the door
open or without the follow through guard in case of being the model with fixed table or, for the model with folding
moving table, will be obligatory the use of the follow through guard while the table is folded and the use of the
moving table with front protector in superior position and blade protector regulated to the suitable height.
To use the machine, it is essential to have read at all the instructions and to follow the indications of installation
and use. In case of needing some explanation please, not doubt in contacting with its supplier, or, with
Equipamientos Cárnicos, S.L. directly.
The machine will never be used with moving table folded and/or follow through guard disassembled, depending
on model.
9