5. OPERATIONS FOR BLUETOOTH
PHONE TRANSCEIVER UNIT
Basic Operations
•
Turning on the power
The unit turns on immediately when power is supplied. It can only be turned
off if car engine is off.
Resetting the Transceiver unit
•
This function is used to restore to factory default setting and clear all the
pairing information.
1. Press the [ RESET ] button once to perform reset function.
Notes:
• Transceiver will remain as power on state.
• The previously-connected device(s) may still hold the Transceiver information. Thus
if the device initiate a Bluetooth
mode, the connection may be successful.
•
Activating Bluetooth
1. Turn on the Transceiver by powering up the car audio system, note that
2. Press and hold the [
Note:
• If no device is paired to the Transceiver after 3 minutes, pairing mode will be
cancelled.
For more information on Bluetooth
Sequence" on page 10.
16
1EN_OM_Receiver BLT370.indd 16
the Red LED blinks once every 5 seconds to confirm that the power is on.
or longer to activate Bluetooth
BLT370
connection when the Transceiver is in pairing
®
Transceiver pairing mode
®
] and [
] buttons simultaneously for 2 seconds
pairing mode.
®
pairing, please see chapter "Pairing
®
AUDIO/MOBILE-
®
4/5/07 2:14:34 PM