Fairchild T7800 Instrucciones Para La Instalación Operación Y Mantenimiento página 2

INSTALLATION
You can mount the Model T7800 on a flat surface using two 10-32
Screws. For more information, see Figure 2.
The Model T7800 ships from the factory with Mounting Kit 16799-1
for Panel or Wall Mounting and Mounting Bracket Kit 16893 for Din
Rail Mounting. For more information, see Figure 3 and Figure 7.
An optional mounting kit, 19254-1, is available to install the unit on
a 2" pipe. For more information, see Figure 8.
Figure 2. TA7800 Outline Dimensions
Figure 4. TT7800 Outline Dimensions
Figure 6. TR7800 Outline Dimensions
NOTE:
Part of the TDFI7800 enclosure is constructed of Non-Metallic
material. To prevent the risk of electrostatic sparking, the en-
closure shall only be cleaned with a damp cloth. The TR7800
transducer is designed for use with the TR Rack Kit. Physically,
it is the same as the TT7800 (Terminal Block) unit except that the
terminal block has been rotated to the back. For more informa-
tion, see Figure 6.
Figure 3. Mounting Kit 16799-1 (included with unit)
Figure 5. TD7800 Outline Dimensions
Figure 7. Din Rail Mounting Kit 16893 (included with unit)
2