Risk Of Electric Shock; Warning - mamibot iGLASSBOT W120 Manual Del Usuario

1. Important Safety Instructions and Warning

1.3 Risk of Electric Shock!

 Always switch the device off before carrying out any cleaning or maintenance work.
 Never pull the power plug out of the socket by the power cord; instead, pull it out by the power
plug itself.
 Never perform repairs on your device yourself. Repairs to electric devices may only be carried out by
authorized customer service center.
 Do not insert any pointed objects into the electric contacts.
 Do not change the contacts.
 Do not continue to operate the robot if the device itself or the power cord is damaged.
 Contact your local customer service in the event of damage.
 Do not clean the robot, the power cable in water or other liquids.
 Do not use the robot on damp ground or in places in which it can get into contact with liquids or be
immersed in water.

 Make sure that you do not damage, bend or twist the power cord. Do not place any heavy

1.4 Warning

1.
2. Check if the safety rope is broken or the knot is loose before operating the device.
3. Set danger-warning area downstairs for no-balcony window and door.
4. Battery shall be full-charged (Orange lamp ON) before using.
5. Do not use it on rainy or moist days.
6. Turn power on before you put device onto glass.
7. Make sure the device can stick and stand on glass surface while put onto glass.
8. Before turn power off, please hold the device.
9. Do not use it on frameless glass.
10. Make sure to put the cleaning pad on the bottom of the device correctly for no leakage.
11. Do not spray or pour water onto the device.
12. Prohibit children from using this device.
13.
slightly scratched due to dirt on the glass while operating.
14.
15.
Scan QR Code for APP downloading from here
Android System iOS System
iOS System:
Requires iOS 7.0 or later. Compatible with iPhone
iPad, and iPod touch.
Android System:
Requires Android 4.3 or later, blueteeth 4.0 or later.
Notes:
Make sure the W120 is switched on before connecting;
If it is not connected succesful, turn off the APP from
device background, try again later.
4