Installation; Assemble The Adapter; Fix The Safety Rope; Attach Cleaning Pad - mamibot iGLASSBOT W120 Manual Del Usuario

3. Installation

3.1 Assemble the Adapter

Power Adapter
extension cable
connector (End B)
A. Connect DC plug (End A) of Power Adapter with extension cable (End B), as above. 1
B. Connect End C to the robot power socket, screw the connector until it's tightly locked. 2

3.2 Fix the Safety Rope

A. Put the safety rope through the handle and
make a tight knot. 3
B. Tie the other end of the rope to indoor
fixture securely. 4

3.3 Attach Cleaning Pad

A. Choose the proper cleaning pad for your
window.
B. Attach the cleaning pad to W120 bottom
properly,the pad should not cover driving
treads or edge sensors. 5
C. Spray 5 times of cleaning solution to the
upper and lower side of W120, 6 wipe the
bottom after spraying. 7
DC plug (End A)
L-shape connector (End C)
Plug into DC power jack
DE extension cable
3
Yellow Cleaning
Pad for glass with
heavy dirt / dry
cleaning
7
4
Gray Cleaning
Pad for glass with
light dirt / wet
cleaning