Take Off W120 After Cleaning; Use App On Your Smartphone; Maintenance; Cleaning Pad Maintenance - mamibot iGLASSBOT W120 Manual Del Usuario

4. Operate W120

4.5 Take off W120 after cleaning

W120 will return to its starting point automatically after cleaning is finished. There is beep warning when
cleaning is completed.
A. Use remote control to move your W120 to a reachable location;
B. Press On/Off Button for 2 seconds to switch it off;
C. Grasp the handle and take it off from the window;
D. Untie the safety rope after finishing cleaning. Put the device and its spare parts in dry condition for
future use.

4.6 Use APP on Your Smartphone

A. Download App for your iOS/Android device (refer to page 2 to scan and download, or search for
"iGlassbot" in your Appstore or googleplay).
B. Turn on BLUETOOTH on your cellphone, and open iGLASSBOT APP on your phone.
C. Click the BLUETOOTH ICON on your iGLASSBOT interface to search device, and connect your W120
with your phone, you can control it through cellphone now.

5. Maintenance

5.1 Cleaning Pad Maintenance

Put your W120 up-side-down, take off the cleaning pad and put it into cold water, wash the
cleaning pad with detergent and dry it for reuse.
Note: wet cleaning pad is not suggested to be used as it may get your robot stuck when
cleaning glass with heavy dirt.

5.2. Fan Maintenance

Put your W120 up side-down, use a clean and dry cloth to wipe out dirt/debris on the fan.

5.3 Edge Sensors Maintenance

Put your W120 up side-down, use a clean and dry cloth to wipe out dirt/debris of the sensors.

5.4 Driving Treads Maintenance

Put your W120 up side-down, use a clean and dry cloth to wipe out dirt/debris on it.
Wash
Cleaning Pad
Clean Fan Clean Edge
Sensors
9
Clean Driving
Treads