Parts Required - Atomic G01342W Manual De Instrucciones

1 pc - P1 Side Apron
16 pcs - P13 Plastic Rod Washer
16 pcs - P14 Rod Bumper
STEP 1:
Find a clean, level place to begin the assembly of your soccer table. We recommend building the table on the
box top to protect the parts during assembly.
Attach P13 Plastic Rod Washer and P14 Rod Bumper to the rods as shown in FIGURE 1. Place one P1 Side
Apron UPSIDE DOWN with the laminated side facing out as shown in FIGURE 1.
Align the rods as shown in FIGURE 1.
Please note the location of the hole that is near one end of each rod. This is the handle end of the rod.
There will be four handles on each side of the table. It is critical that you set the rods as shown below so
the table will be correct when flipped over.
C1 Rod Bushing
Note: C1 Rod Bushings
are already attached
onto P1 Side Apron
R5
R4, R5 and R6
Hole/Handle
goes on the
other end of
these rods
All Rights Reserved.
© 2012 Escalade Sports

PARTS REQUIRED:

1 pc - R1 2 Player Rod Assembly Black
2 pcs - R2 3 Player Rod Assembly Black
1 pc - R3 5 Player Rod Assembly Black
R4
R2
R6
R3
R1, R2 and R3
Hole/Handle End
R5
R1
R2
6
1 pc - R4 2 Player Rod Assembly Ivory
2 pcs - R5 3 Player Rod Assembly Ivory
1 pc - R6 5 Player Rod Assembly Ivory
P1
FIGURE 1
P13
P14
For Customer Service Call 1-888-996-2729
P14
P13