Tabla de contenido
Publicidad
Advertencias
Hazardous reagents (sodium persulfate, hydrochloric acid, and phosphoric
acid) are used in the Analyzer. The waste stream from the instrument is acidic
and must be disposed of properly. Consult your federal, state, and local
government regulations.
This is a Safety Class I product. It must be must be attached to a grounded
power source. To avoid damage to the Analyzer and the chance of injury, make
sure the Analyzer is connected to a power line of the proper voltage.
SUEZ © 2019
This symbol on the instrument indicates that the user should refer
to the manual for operating instructions.
The vial port contains sharp needles designed to pierce the septa
of sample vials. Do not put fingers or inappropriate materials into
the vial port.
To protect against inhalation of toxic fumes, make sure the
Analyzer is installed in a well-ventilated area. Depending on the
composition of the sample, halogens such as chlorine or bromine,
or toxic fumes from fluoride, cyanide, or other toxic salts, can be
emitted into the Analyzer's waste. To protect against inhalation of
hazardous fumes, add sodium hydroxide (lye) to the waste
container to neutralize acid in the waste. Avoid stratification of the
waste within the container by occasionally agitating the container.
This symbol indicates that to comply with European Union
Directive 2002/96/EC for waste electrical and electronic equipment
(WEEE), the Analyzer should be disposed of separately from
standard waste.
Warning
Warning
Warning
Warning
Warning
Warning
20 / 271
DLM 68100-12 ES Rev. B
Publicidad
Tabla de contenido
