Tabla de contenido
Publicidad
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
English
This symbol on the instrument indicates that the user should refer
to the manual for operating instructions.
This symbol indicates the protective earth terminal (ground) for
the product.
For continued protection against fire hazard, replace fuse with
same type and rating.
This is a Safety Class I product. It must be wired to a mains supply
with a protective earthing ground incorporated into the power
cord. Any interruption of the protective conductor, inside or outside
the equipment, is likely to make the instrument dangerous.
Intentional interruption is prohibited.
Always stop TOC measurements/protocols before turning off or
unplugging the Sievers Autosampler.
To protect against damaging the membrane in the Analyzer,
ALWAYS avoid using the syringe on the needle assembly while it
is still attached to the Autosampler.
ALWAYS turn the screw to the Sievers Autosampler arm
counterclockwise, as reversing the screw direction can damage
the z-axis needle movement.
Automuestreador Sievers
DIG 77000-02 ES Rev. A
A
Anexo A: Advertencia
W
ARNINGS
53 / 67
Guía de instalación
SUEZ © 2018
Publicidad
Tabla de contenido
