Tabla de contenido
Publicidad
Anexo A
Observe the following guidelines when using the Sievers
Autosampler in conjunction with flammable liquids: To reduce the
risk of fire, the Sievers Autosampler shall not be used to sample
flammable liquids. Sievers Autosampler should have no parts in
contact with the surface of the fluid or near the surface of the fluid
that consume power, produce heat, or conduct heat from other
areas in any form. Ensure that no parts, in or near the fluid surface
are capable of igniting a flammable liquid.
Keep clear of the probe arm during operation. Although it is
designed to stop upon detecting an obstruction, the probe arm
can move without warning during normal operation and at start-
up.
The sample needle is sharp. Avoid contacting the needle
assembly during analysis, and use caution when handling the
needle assembly when the needle is at rest.
This symbol indicates a pinch point area on the product. Avoid
contacting the needle assembly prior to or during movement of the
needle.
This symbol indicates the European Union Directive 2002/96/EC
for waste electrical and electronic equipment (WEEE) requires
disposing the Analyzer separately from waste.
Français
Ce symbole sur l'appareil signifie que l'utilisateur doit consulter le
manuel pour des instructions quant au fonctionnement.
Ce symbole indique la borne de terre de protection (terre) pour le
produit.
Pour une protection constante contre les risques d'incendie,
remplacer le fusible avec le même type et la même résistance.
Automuestreador Sievers
DIG 77000-02 ES Rev. A
W
ARNINGS
A
VERTISSEMENT
54 / 67
Guía de instalación
SUEZ © 2018
Publicidad
Tabla de contenido
