Drying The Truman Cell - Oreck ProShield Plus Guía De Usuario

5
Oreck's
Assail-a-Cell
®
cleaner is an
excellent way to
clean the
collector cell.
2
5. Spray Oreck Assail-a-Cell
and cover each surface. Allow the cleaner to soak for a few
minutes but do not let it dry. Thoroughly rinse the Truman
Cell with clean water.
An alternative method to clean the Truman Cell is to rinse or
soak it in warm water for loose debris. Mild liquid dish
detergent in water may also be used to help break down
tough dirt and residue. Thoroughly rinse the Truman Cell
with clean water.
Note: To prevent damage to the components of the Truman
Cell, do not put in dishwasher or use a cotton swab.
Tough residue such as tar from tobacco smoke may need
additional cleaning or longer soaking.
6. Shake excess water from the Truman cell to speed up drying
time. Do not use heated or compressed air to dry.
7. Place the Truman Cell back into the unit by sliding it straight
down into the slots. The Truman Cell is specially designed
so that it can only be inserted in one direction.
8. Close the Top Cover securely.

Drying the Truman Cell

Note: The Truman Cell must be completely dry after cleaning
in order to operate properly. A drying mode is available to help
remove any residual moisture. While in this mode, the fan will
be running on Medium speed, and no power will be supplied
to the Truman Cell. Once the unit detects that the Truman Cell
8
3
7
cleaner between each Cell Plate
®
1