Display Settings - Diehl AKO PhaseBalancer PLATINUM Serie Instrucciones De Instalacion Y Uso

PLATINUM PhaseBalancer
Settings
Note
Installation and operating manual: PLATINUM PhaseBalancer
14
Version 05/2010
Mat. No. 742 679-AA
If the inverter is connected in the PLATINUM network, after
confirmation of the reaction time all parameters and the settings of
the PhaseBalancer are transmitted to the additional inverters in the
PLATINUM network.
During the transmission, the inverter shows the following screen.
If the transmission was successful, the inverter shows the following
screen.
If the feeder line of an inverter is reduced due to an unbalanced load,
then no status message is shown on the inverter.
6.2

Display settings

The inverter shows the current PhaseBalancer configuration in the
Parameter service menu.
Key
ST
Navigate between the parameter screens.
ESC Back to the Main Menu.
OK Back to the Service menu.
Function