Tare Function; Backlight; Setting Limits Function - Gram D3 Serie Manual De Utilización

TARE FUNCTION

1. Place a container on the weighing pan and press the
weight.
2. The display will be at zero and Tare indicator will light on.
3. Add the product into the container, the display will show its weight (the net
weight).
4. Remove the container, the display will show the gross weight in negative value.
5. Press the
disappear.
Tare range:
≤1/3F.S
ZERO FUNCTION.
If the weighing pan is empty, however the display doesn´t show the 0 value, press the
key to make display zero.
Zero range:
<=4%F.S, it is invalid under tare mode)

BACKLIGHT

(This function is only effective in the LCD model)
Press the key for 2-4 seconds to switch on or switch off the display´s backlight.

SETTING LIMITS FUNCTION

High limit setting
1. Press the
2. Press the
3. Press the
4. Press the
5. When you set the last digit, press the
value.
Low limit setting
1. The display will show "-LL-"
2. Press the
key again, the display will show 0 and Tare indicator will
key, the display will show "-HH-".
key to confirm and enter to the parameter.
to set the value of the active digit.
key to confirm the active digit value and go to the next digit.
key to confirm and enter to the parameter.
key to substract his
to confirm and to set the low limit
8